Animal Hyperbaric Chamber

In the current pet market landscape, animal intensive care units are being used more frequently

RELATIONSHIP BETWEEN CLINICAL VETERINARY MEDICINE AND ANIMAL MONITORING OXYGEN CHAMBERS

Firstly, the purpose of the Animal Hyperbaric Chamber is to provide sick animals with a better environment for care, with the goal of speeding up their recovery times. Its most basic function is to provide a stable temperature and humidity environment to improve the comfort of animals. At the same time, it can support medical conditions such as infusion and atomization treatment for sick animals. In addition, the Hyperbaric Chamber should be easy to disinfect and facilitate health management. The high-end monitoring cabin can also provide oxygen therapy to animals and has the ability to monitor and discharge the CO2 concentration in the cabin.

In fact, animals have the same basic needs as humans. When their overall physical condition is poor, they need more care and attention. A safe and comfortable medical environment can help animals recover faster and better. For example, newborn dogs and cats born by caesarean section do not yet have the ability to regulate their body temperature. Hypothermia will significantly increase mortality. At this time, if the newborn animals are placed in a care unit to provide a warm and comfortable environment, it can greatly improve their survival rates.

Our animal Hyperbaric Chambers are known as animal intensive care units and can meet the specific oxygen needs of the environment when the animal is in a life-threatening condition.

TRANSPORTATION AND STORAGE CCONSIDERATIONS

The product should not be exposed to open air, direct sunlight, corridors, etc. It should also not be exposed to temperatures outside the range of 10°C – 40°C, high humidity, or placed near an air conditioner where the air is blowing directly. Please place it in a horizontal, stable location. Otherwise, it will affect the normal use of the equipment compressor and may cause noise during use. Choose a well-ventilated place to ensure a good medical environment for animals; otherwise, it may frequently cause excessive carbon dioxide concentration in the treatment cabin, which will affect the normal treatment of animals.

CHECK THE LIST-BEFORE USING THE EQUIPMENT

Please make sure that you are familiar with the use of this equipment and read this instruction manual before using the product. Ensure that the working environment is clean and has low humidity. Avoid placing heavy objects on the equipment. Ensure that the equipment operates horizontally and is not tilted during use.

FEATURE

1. Precise temperature control;
2. Precise oxygen concentration adjustment system;
3. Precise humidity control;
4. High-concentration negative ion air purification system;
5. Nebulization treatment;
6. Ultraviolet sterilization;
7. In-cabin carbon dioxide removal system;
8. System fault navigation and alarm system;
9. Touch-type full microcomputer operating system;
10. Switchable light source (warm light source, medical examination light source);
11. Silent compressor refrigeration system, temperature control is faster and more balanced;

SIZE

External dimensions
long：1225mm
Width：730mm
high：1570mm
Inner dimension
Go up to the cabin
long：820mm
Width:655mm
high：540mm
Get off the cabin
long：820mm
Width:655mm
high：740mm

SCOPE OF APPLICATION

1: The single cabin has the highest utilization rate and is suitable for hospitals that are newly launching ICU medical projects;
2: The standard version and the conventional pet hospital cage can be seamlessly replaced, suitable for additions to old hospitals;
3: Suitable for medium-sized animal hospitals and cat specialized hospitals;
4: Suitable for the overall layout of the hospital and more convenient to operate;

CLEANING

The power supply of the equipment must be cut off before cleaning. Use an ordinary cotton cloth dipped in soapy water to wipe the product shell and quick connector. Ensure that no liquid enters the equipment, as this can cause mechanical damage. Remove the detergent thoroughly after cleaning, and dry the surface with a clean, dry, soft cloth. Do not use worn materials for cleaning.

DISINFECTION

It is recommended that users use 75% alcohol disinfectant wipes or 70%-80% (volume ratio) ethanol disinfectant. Soak a clean, dry gauze in the disinfectant and wring it out. Wipe the surface that needs to be disinfected twice, allowing 3 minutes for the disinfectant to take effect. Allow it to air-dry naturally or dry the residual disinfectant with a clean, dry soft cloth. When there is debris on the surface, remove the pollutants first, then clean and disinfect. Do not use open flames during this process, as oxygen is flammable.

OUR SERVICE
1.More Professional service
2.Better manufacture ability
3.Various payment term to choose
4.High quality/Safe material/Competitive price
5.Small order available
6.Quickly response
7.More safe and fast transport
8.OEM design for all customers

PACKAGING & SHIPPING
Packaging: 1.one piece in one bag
2.Customer required packing is available

Shipping: by air, sea, or express

Delivery time: about 30~60 days after order details and production confirmed.

Hot Tags: animal hyperbaric chamber, China animal hyperbaric chamber manufacturers, suppliers, factory, animal intensive care unit, dog icu cage, pet medical monitoring pod, small oxygen concentrator for puppies, animal medical icu, plastic puppy crate with roof