Puppy ICU Unit
Animals affected by heat stroke frequently experience it following strenuous physical activity or recent exposure to hot, humid environments. Interestingly, their core body temperature may not be elevated—it could actually be normal or even below normal (hypothermic). Additional signs to watch for include profound lethargy, pronounced weakness, excessive panting, a rapid heartbeat (tachycardia), and in some cases, disorientation or collapse. Early recognition of these symptoms is critical, as heat stroke can progress quickly without obvious fever,...
Description

B-Series Pet ICU: More Than Equipment - A Warm Guardian for Post-Op Recovery
Imagine a pet that has just come out of surgery - weak, with low body temperature, a slow heart rate, and shallow breathing. During the procedure, we can monitor their vital signs closely. But once they wake up from anesthesia, those wearable monitors can no longer be used. There's another risk that's easy to overlook: during surgery, blood oxygen levels are usually kept above 90%. But when the animal is returned to a normal environment, the oxygen concentration drops sharply to 21%. If we can't track temperature and oxygen levels in time at this stage, the risks after anesthesia increase significantly.
This is where a professional pet ICU becomes essential. It provides the right temperature, humidity, and oxygen concentration to help pets warm up quickly, improve circulation, speed up anesthesia metabolism, and reduce post-op complications. For young dogs in particular, the Puppy ICU Unit offers more delicate and gentle recovery support.
Our B-Series was designed with this very philosophy in mind. It not only provides precise control over temperature, humidity, oxygen, and CO₂, but also integrates multiple support functions. Compared to the previous model, both stability and the user interface have been thoroughly upgraded - making it ideal for clinics that want to elevate their post-operative care. And every Puppy ICU Unit in this series meets the same high standards of reliability.
Materials: Interior of 304 stainless steel, corrosion-resistant, rounded corners for easy cleaning.
Exterior: Painted finish, curved edges, simple and elegant.
Interface: Clean layout, all controls and readings on one screen.
Noise: Separate AC backpack with dampening rings, ~55 dB inside chamber, quiet for recovery - critical for a Puppy ICU Unit where stress reduction matters most.
Climate system: PTC dot heating + dual thermal protection + Panasonic compressor for precise temperature, dehumidification, and cooling.
Ranges: Temp 15–45°C (cooling for heatstroke, warmth for exotic pets); Humidity 30–90% (aids healing); Oxygen 21–65% (40–50% post-op, moderate for heart patients).
CO₂ monitor: Real-time ventilation check to ensure safe gas exchange.
Lighting: Warm light + exam light for checking pupils, mucous membranes, wounds, etc.
Nebulization: Plug-in port, 20 min sessions with 45% oxygen for better drug absorption.
Air purification: 24/7 negative ion operation to settle dust and keep air clean.
UV disinfection: For internal ducts and pipes; other functions auto-off during UV cycle.
Smart ventilation: Auto fresh-air exchange when CO₂ > 4,000 ppm to prevent acidosis; emergency ventilation runs at least 15 min after power failure.
Anti-mistouch: Auto-lock after 3 minutes; tap upper-right corner to unlock.
Clinical ports: Quick oxygen port, flow meter, nebulizer port, infusion port and pump bracket; quick-access door minimizes environmental fluctuation.
Data logging: Automatically records temp, humidity, oxygen, CO₂, and system status - useful for review and maintenance.
TECHNICAL SPECIFICATIONS
Input voltage: AC220V~
Frequency: 50/60Hz
Rated power:600W
Weight:80KG
Dimension of the appearance:80CM*78CM*80CM
REQUIREMENTS OF WORKING ENVIRONMENT
Operation temperature:10℃-30℃
Relative humidity:≤60%RH
Atmospheric pressure:700hPa~1060hPa
Application Scenarios
It is mainly used for sick, critical, weak, or post-operative pets for temperature recovery, infusion, oxygen therapy, nebulization, emergency rescue, and hospitalization. It also supports sterile, constant-temperature nursing for young pets.
Schematic Diagram Of The Product
1:Stainless Steel Liner 2:operation panel 3:Tempered glass door 4:Visitation Window 5:Electrical Control Unit 6:Refrigeration Components 7:Infusion Support
PRODUCT SIZE



|
Product parameters |
|||
|
Product Model |
LEILONG BS |
Display Touch screen |
7-inch super large touch screen |
|
Input voltage |
AC100V/220V~ |
Sterilization system |
External 24 hours non-stop disinfection and sterilization deodorant system |
|
Frequency |
50/60 Hz |
Maximum power consumption |
600KW |
|
Temperature control mode |
one chamber independent split cooling /PTC heating. |
Average power consumption |
600W |
|
Weight |
80 kg |
Power failure security |
Emergency ventilation hatch with programmed control |
|
Appearance size |
80CM×78CM×80CM |
Negative ion purification function |
(7.2X106PCS/cm3X4)High concentration anion |
|
Air purification function |
Ultraviolet germicidal lamp; High concentration anion air purification |
Dehumidification indicators |
Automatic dehumidification system, standard humidity control at 40%, actual humidity control at < 50% |
|
Conditions of use |
-10℃~40℃Environment (indoor) |
Standard spare parts |
Various hanging racks and animal sleeping baskets (optional) |
|
Set temperature |
15-38℃The temperature control accuracy±0.5℃ |
Ultraviolet sterilization |
UVC band 253nm, efficient ultraviolet sterilization system |
|
Set oxygen concentration |
21℃-60℃Control precision±1% |
The fan control |
Automatic equalizing air supply |
|
Carbon dioxide concentration, monitoring and removal |
300-5000PPM,error±10PPM Built-in medical CO2 high-efficiency purifying agent and automatic CO2 removal device |
External humidifier |
Maximum atomization rate ≥ 0.2mL /min, fog particle (0.5-2um) noise ≤40dB(A)(optional) |
|
Alarm, warning |
Abnormal O2 concentration, temperature, sensor, CO2 concentration, and emergency hatch switch |
LED light |
There are two ways of light control: warm light is divided into ten levels and its strength can be adjusted, and cold light is used for medical examination |

FAQ
Q: How many different types of products does your company produce?
Q: When can I get the price?
Q: What is your MOQ?
Q: What are your payment terms?
Q: How long is your delivery time?
Hot Tags: puppy icu unit, China puppy icu unit manufacturers, suppliers, factory, veterinary icu emergency response for pets, pet icu ear drops, icu for pet parasite infected pets, icu for pet digestive problems pets, icu for pet heart problems pets, veterinary icu compression bandages for pets
Send Inquiry
You Might Also Like














